Hyundai Venue (QX): Automatic Transaxle Control System / Description and operation

Description
•
Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values.
•
These values are used to control the actuators and achieve the desired control output.
•
If a problem with the drivetrain, including the transaxle, has been identified, perform self-diagnosis and basic transaxle inspection (oil and fluid inspection) and then check the control system's components using the diagnosis tool.
â–¶ Control System Composition

Hyundai Venue. Description and operation

    Adjustment TCM Learning 1. Overview and purpose of learning 1) The purpose is to ensure the initial operation safety by correcting the oil pressure differences between transmissions.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation

    Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.

    Hyundai Venue (QX) (2020-2026) Service Manual: Blower Unit. Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery / recycling / charging station. 3. When the engine is cool, drain the engine coolant from the radiator.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0119