Repair procedures • ATF cooler is a unit with the radiator, so refer to radiator removal/installation procedures in the engine section.
Description • Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery / recycling / charging station. 3. When the engine is cool, drain the engine coolant from the radiator.
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.