Hyundai Venue (QX): Timing System / Drive Belt Tensioner. Components and components location
| Components |
| 1. Alternator Bracket (Drive
Belt Tensioner) |
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2.
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Temperature Sensor. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Vehicle Information
- Maintenance
- Tire Pressure Monitoring System (TPMS) (Type A)
- New on site
- Most important about car
