Hyundai Venue (QX): Timing System / Drive Belt Tensioner. Repair procedures

Hyundai Venue (QX) (2020-2025) Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner. Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the alternator.
(Refer to Engine Electrical System - "Alternator")
3.
Remove the alternator bracket (belt tunsioner) (A).
Tightening torque :
19.6 - 26.5 N.m (2.0 - 2.7 kgf.m, 14.5 - 19.5 lb-ft)

Hyundai Venue. Drive Belt Tensioner. Repair procedures
4.
Installation is reverse order of removal.

    Components 1. Alternator Bracket (Drive Belt Tensioner)

    Components 1. Crankshaft damper pulley

    Other information:

    Hyundai Venue (QX) (2020-2025) Service Manual: Evaporator Temperature Sensor. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.

    Hyundai Venue (QX) (2020-2025) Service Manual: Components and components location

    Categories

     
    Copyright © 2025 www.hvenueqx.com - 0.0108