Hyundai Venue (QX): Timing System / Idler. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Engine Mechanical System / Timing System / Idler. Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the drive belt idler (A).
Tightening torque :
42.2 - 53.9 N.m (4.3 - 5.5 kgf.m, 31.1 - 39.8 lb-ft)

Hyundai Venue. Idler. Repair procedures

Hyundai Venue. Idler. Repair procedures   
•
Check the idler. if it is grease leak or abnormal rotation, replace the idler.
3.
Installation is reverse order of removal.

    Components 1. Idler

    Components 1. Alternator Bracket (Drive Belt Tensioner)

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Ambient Temperature Sensor. Description and operation

    Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

    Hyundai Venue (QX) (2020-2026) Service Manual: Troubleshooting

    Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surging" (repeated alternating acceleration and deceleration) occurs after setti

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0173