Hyundai Venue (QX): Cylinder Block / Drive Plate. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Engine Mechanical System / Cylinder Block / Drive Plate. Repair procedures

Removal and Installation
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate(A).
Tightening torque :
71.5 - 75.5 N.m (7.3 - 7.7 kgf.m, 52.8 - 55.6 lb-ft)

Hyundai Venue. Drive Plate. Repair procedures
3.
Install in the reverse order of removal.

    Components 1. Crankshaft sprocket 2. Crankshaft thrust bearing 3. Crankshaft upper main bearing 4. Crankshaft 5.

    Components 1. Fly Wheel

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation

    Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.

    Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Components and components location

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.017