| Components |

| 1. Driver Air Bag (DAB) 2. Steering Wheel |
3. Clock Spring |
Description • Driver Air Bag (DAB) DAB is installed in the steering wheel, and electrically connected to the SRSCM via clock spring.
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2.
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Replacement 1. Open the glove box. 2. Press both sides of the glove box (A) and take it out. 3. Remove the filter cover (A) by pressing the knob. 4.