Hyundai Venue (QX): ABS(Anti-Lock Brake System) / EBD(Electronic Brake-force Distribution). Description and operation

Hyundai Venue (QX) (2020-2026) Service Manual / Brake System / ABS(Anti-Lock Brake System) / EBD(Electronic Brake-force Distribution). Description and operation

Description
The EBD System (Electronic Brake force Distribution) as a sub-system of the ABS system is to control the effective adhesion utilization by the rear wheels.
It further utilizes the efficiency of highly developed ABS equipment by controlling the slip of the rear wheels in the partial braking range.
The brake force is moved even closer to the optimum and controlled electronically, thus dispensing with the need for the proportioning valve.
The proportioning valve, because of a mechanical device, has limitations to achieve an ideal brake force distribution tothe rear wheels as well as to carry out the flexible brake force distribution proportioning to the vehicle load or weight increasing. And in the event of malfunctioning, driver cannot notice whether it fails or not.
EBD Controlled by the ABS Control Module, calculates the slip ratio of each wheel at all times and controls the brake pressure of the rear wheels not to exceed that of the front wheels.
If the EBD fails, the EBD warning lamp (Parking brake lamp) lights up.
Advantages
–
Function improvement of the base-brake system.
–
Compensation for the different friction coefficients.
–
Elimination of the proportioning valve.
–
Failure recognition by the warning lamp.
Comparison between Proportioning valve and EBD

Hyundai Venue. EBD(Electronic Brake-force Distribution). Description and operation

    Standard Flow of Diagnostic Troubleshooting Notes With Regard To Diagnosis The phenomena listed in the following table are not abnormal. Condition Explanation System check sound When starting the engine, a thudding sound can sometimes be heard coming from inside the engine compartment.

    Components 1. Front - right tube 2. Rear - left tube 3. Rear - right tube 4. Front - left tube 5. MC SEC 6.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Immobilizer Control Unit. Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to Body - "Glove Box Housing") 3. Remove the smart key unit (A) after loosening the nuts.

    Hyundai Venue (QX) (2020-2026) Service Manual: Photo Sensor. Description and operation

    Description The photo sensor is located at the center of the defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received which is transferred to th

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0164