
Front camera
In order for FCA system to operate properly, always make sure the front view camera is clean and free of dirt, snow, and debris. Dirt, snow, or foreign substances on the surface may adversely affect the sensing performance of the camera.
NOTICE
NOTICE
Information
Have the system checked by an authorized HYUNDAI dealer when:
Warning message and warning light

Forward Collision-Avoidance Assist (FCA) system disabled. Camera obscured
When the sensor is contaminated due to external environment such as snow, rain or foreign substances, FCA system operation may stop temporarily. If this occurs, a warning message will appear on the LCD display. In order for FCA system to operate properly, remove any dirt, snow or debris and clean the camera sensor cover before the system operation.
FCA may not properly operate in an area (e.g. open terrain), where any substances are not detected after turning ON the engine.
WARNING
Depending on the driving, traffic, road or weather condition, FCA system may not activate properly without the warning message displayed.
FCA produces warning messages and warning alarms in accordance with the collision risk levels, such as abrupt stopping of the vehicle in front or insufficient braking distance.
Check Forward Collision-Avoidance Assist system When FCA is not working properly, FCA warning light () will illuminate and the warning message will appear for a few seconds.
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.