| Component Location |

| 1. Front bumper cover |
Component Location 1. Front bumper cover 2. Front bumper side bracket [RH] 3. Front bumper side bracket [LH]
Replacement • Put on gloves to prevent hand injuries.
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Description and Operation Blcok Diagram • This system monitors the driving situations through the radar and the camera. Thus, for a situation out of the sensing range, the system may not normally operate.