| Replacement |
| [Front door side weatherstrip] |
| 1. |
Loosen the front door checker (B) mounting bolt.
|
| 2. |
Detach the clips, then remove the front door side weatherstrip (A).
|
| 3. |
To install, reverse removal procedure.
|
| [Front door body side weatherstrip] |
| 4. |
Remove the front door body side weatherstrip (A).
|
| 5. |
To install, reverse the removal procedure.
|
Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2.
Component Location 1. Front door latch
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model.
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.