Hyundai Venue (QX): Front Door / Front Door Trim. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Front Door / Front Door Trim. Repair procedures

Replacement
1.
Using a flat-tip screwdriver and remove the front door quadrant inner cover (A).

Hyundai Venue. Front Door Trim. Repair procedures
2.
Loosen the mounting screw and remove the front door trim (A).

Hyundai Venue. Front Door Trim. Repair procedures
3.
Remove the front door inside handle cage (A).

Hyundai Venue. Front Door Trim. Repair procedures
4.
Press the lock pin and separate the mirror switch connector (A) and power window connector (B)

Hyundai Venue. Front Door Trim. Repair procedures
5.
To install, reverse removal procedure.
Hyundai Venue. Front Door Trim. Repair procedures   
•
Make sure the connector is connected properly.
•
Make sure the door locks / unlocks and opens / closes properly.
•
Replace any damaged clips (or pin-type retainers).
•
Make sure the glass is operated properly.

    Component Location 1. Front door trim

    Component Location 1. Front door window glass

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation

    Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.

    Hyundai Venue (QX) (2020-2026) Service Manual: Warning Indicator. Repair procedures

    Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0118