| Component Location |

| 1. Front door trim |
Adjustment Glass Adjustment • Check the glass run channel for damage or deterioration, and replace it if necessary.
Replacement 1. Using a flat-tip screwdriver and remove the front door quadrant inner cover (A). 2.
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model.
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.