| Component Location |

| 1. Front seat headrest 2. Front seat back cover |
3. Front seat cushion cover |
Replacement 1. Loosen the front seat mounting bolts. [Front] Tightening torque : 49.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.