| Description |
| • |
For the convenience of drivers during the winter, exothermic paint is
applied to the surface of the steering wheel to generate heat when it
is gripped.
|



Components 1. Heated steering wheel switch
Schematic Digram
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shroud panel.