| Removal |
| 1. |
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
|
| 2. |
Loosen the mounting screws and remove the rear view camera.
|
| Installation |
| 1. |
To install, reverse removal procedure.
|
Description Rear view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.