Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel.
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery / recycling / charging station. 3. When the engine is cool, drain the engine coolant from the radiator.