| Component Location |


Inspection PCB block 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay block.
Fuse Inspection 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2.
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Removal 1. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 2. Loosen the mounting screws and remove the rear view camera. Installation 1.