Hyundai Venue (QX): Fuses And Relays / PDM (Power Distribution Module). Description and operation
| Description |
| 1. |
PDM(Power Distribution Module) Relay Box is used only in SMK(smart key)
variant.
|
| 2. |
It consists of 3 relays namely, ACC relay, IG1 relay, IG2 relay.
|
| 3. |
PDM Relay Box is exclusive used for starting purpose in SMK variant.
|
Fuse Inspection 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the MDPS. (Refer to Steering System - "Motor Driven Power Steering") 3.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Receiver-Drier. Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.
Hyundai Venue (QX) (2020-2026) Service Manual: Warning Indicator. Components and components location
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Child-Protector Rear Door Locks
- Instrument Cluster
- Liftgate
- New on site
- Most important about car
