Hyundai Venue (QX): Fuses And Relays / PDM (Power Distribution Module). Repair procedures

Hyundai Venue (QX) (2020-2025) Service Manual / Body Electrical System / Fuses And Relays / PDM (Power Distribution Module). Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the MDPS.
(Refer to Steering System - "Motor Driven Power Steering")
3.
Remove the PDM relay box (A) after mouting nuts and disconnecting the connector.

Hyundai Venue. PDM (Power Distribution Module). Repair procedures
Installation
1.
Remove the PDM relay box after connecting the connector.
2.
Install the MDPS.
(Refer to Steering System - "Motor Driven Power Steering")
3.
Connect the negative (-) battery terminal.

    Description 1. PDM(Power Distribution Module) Relay Box is used only in SMK(smart key) variant. 2.

    Other information:

    Hyundai Venue (QX) (2020-2025) Service Manual: Troubleshooting

    Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor. Use the table below to help you find the cause of the problem.

    Hyundai Venue (QX) (2020-2025) Service Manual: Description and operation

    Description and Operation Blcok Diagram    • This system monitors the driving situations through the radar and the camera. Thus, for a situation out of the sensing range, the system may not normally operate.

    Categories

     
    Copyright © 2025 www.hvenueqx.com - 0.012