| Circuit Diagram |



Specification Item Specification Coil Resistance (Ω) 18.5 - 22.5 [23°C (73.4°F)]
Inspection 1. Turn ignition switch OFF. 2. Disconnect PCSV connector. 3. Measure resistance between PCSV terminals 1 and 2.
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the console upper front garnish. (Refer to Floor Console - "Floor Console Assembly") 3.