| Component Location |

| 1. Rear center seat belt retractor |
Replacement • When installing the belt, make sure not to damage the pretensioner.
Replacement 1. Remove the rear seat back cover [LH]. (Refer to Rear Seat - "Rear Seat Back Cover") 2.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.