| Replacement |
| 1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
| 2. |
Remove the rear door belt inside weatherstrip (A).
|
| 3. |
To install, reverse removal procedure.
|
Replacement 1. Pull down the front door window glass to the lowest level by pressing the power window glass switch.
Replacement [Rear door side weatherstrip] 1. Loosen the rear door checker (B) mounting bolt. Tightening torque : 21.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shroud panel.
Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.