| Component Location |

| 1. Rear seat cushion cover
|
Replacement [LH] • Put on gloves to prevent hand injuries.
Replacement • Put on gloves to prevent hand injuries.
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.