Hyundai Venue (QX): Cowl Top Cover / Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Cowl Top Cover / Repair procedures

Replacement
1.
Remove the plug hole (A), loosen the mounting nuts and remove the wiper arm (B).
Tightening torque :
22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)

Hyundai Venue. Repair procedures
2.
Separate the washer nozzle (A).

Hyundai Venue. Repair procedures
3.
Detach the clips and remove the cowl top cover (A).

Hyundai Venue. Repair procedures
4.
To install, reverse removal procedure.
Hyundai Venue. Repair procedures   
•
Replace any damaged clips (or pin-type retainers).

    Component Location 1. Cowl top cover

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Immobilizer Control Unit. Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to Body - "Glove Box Housing") 3. Remove the smart key unit (A) after loosening the nuts.

    Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation

    Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0134