Hyundai Venue (QX): Cowl Top Cover / Components and components location

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Cowl Top Cover / Components and components location

Component Location

Hyundai Venue. Components and components location

1. Cowl top cover

    Replacement 1. Remove the plug hole (A), loosen the mounting nuts and remove the wiper arm (B). Tightening torque : 22.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Receiver-Drier. Repair procedures

    Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.

    Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Temperature Sensor. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.024