Hyundai Venue (QX): Passenger Airbag (PAB) Module / Side Airbag (SAB) Module. Description and operation
The Side Airbags (SAB) are installed inside the front seat and protects the
driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of side airbag by using Side Impact Sensor (SIS) signal.
| • |
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If
the circuit resistance is measured with a tester, accidental
airbag deployment will result in serious personal injury.
|
|
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes
before beginning work.
2.
Components
1. Side Airbag (SAB)
Other information:
Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower resistor
must be replaced. (After removing the resistor)
Replacement
1.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the console upper front garnish.
(Refer to Floor Console - "Floor Console Assembly")
3.