Hyundai Venue (QX): Smart Key System / Smart Key. Repair procedures

Smart Key
Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS.

Hyundai Venue. Smart Key. Repair procedures

2.
Select the 'S/W Management' and 'Car model'.

Hyundai Venue. Smart Key. Repair procedures

Hyundai Venue. Smart Key. Repair procedures

3.
Follow the instructions on the screen.

Hyundai Venue. Smart Key. Repair procedures

    Description The SMART KEY system is a system that allows the user to access and operate a vehicle in a very convenient way. To access the vehicle, no traditional key or remote control unit is needed.

    Components Integrated Body Control Unit (IBU) Connector Pin Information No Connector A Connector B Connector C Connector D Connector E 1 - - - - - 2 Rear washer Switch_Input - - Heated handle indicator_output ACC Relay_output 3 Front washer Switch_Input PDW-R power_output ATM solenoid_output - Starter Relay_output 4 Battery (+) Power Hazard Switch_input RH Turn signal lamp actuator_output NTC sensor_input IGN1 Relay_output 5 - Sunroof Status_input - Rear left seat belt indicator_output ESCL (-)_output 6 GND Power Autolight Switch_input Serial communication (K-Line) with EMS - SSB Switch2_input 7 SBL LH_output Rear wiper Switch_input ESCL Unlock Switch_input GND (NTC) SSB Switch1_input 8 SBL Power_input Front wiper volume Switch_input Front wiper low backup switch_input - Outside Hnadle Antenna Passenger (+)_output 9 - Turn Signal Switch_input P position_input (AT) - Interior Antenna1 Power_output Clutch IGN Lock_input (MT) 10 Turn Signal Power_input Fog Switch FR_input Wiper parking switch_input - Interior Antenna2 Power_output 11 Battery (+) ECU Front wiper switch_input Brake Switch_input - Outside Hnadle Antenna Driver (+)_output 12 - Headlamp High Switch_input - - Bumper Antenna Power_output 13 Static Bending RH_output ACC_input - Heated handle switch_input - 14 GND ECU IGN2_input Safety Power Window Enable_output Rear left seat belt switch_output - 15 Heated handle power_output - - Rear right seat belt indicator_output - 16 IGN2_Heated handle power PDW Power_input Front wiper low relay_output Rear center seat belt switch_output - 17 Turn Signal FR LH_output Front wiper high relay_output Wheel Speed Sensor_input 18 Turn Signal RR LH_output - - - 19 - - Rear center seat belt indicator_output - 20 - - - - 21 - - - - 22 - External Buzzer_output - IGN2 Relay_output 23 - - ESCL (+)_output 24 IGN 1_input Multi function switch GND_input ESCL enable_output 25 Room lamp _output Rear right seat belt switch_input Starter feedback_input 26 - Immobilizer Power_output Driver Outside handle_output 27 PDW-R switch_input Immobilizer GND_output Passenger Outside handle_output 28 Turn signal actuator_output AV Tail_output Passenger Outside handle antenna (-)_output 29 - - Interior antenna 1 GND_output 30 PDW-R indicator_input - Interior antenna 2 GND_output 31 Autolight sensor GND_output Alatm Horn Relay_output Driver Outside handle antenna (-)_output 32 Autolight sensor signal_output ESCL COM Bumper antenna GND_output 33 Autolight sensor power_output - - 34 LIN Rear wiper relay_output - 35 B-CAN (Low) C-CAN (High) - 36 B-CAN (High) C-CAN (Low) - 37 Turn Signal RR RH_output - 38 Turn Signal FR RH_output

    Other information:

    Hyundai Venue (QX) (2020-2025) Service Manual: Antenna Coil. Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shroud panel.

    Hyundai Venue (QX) (2020-2025) Service Manual: Troubleshooting

    Diagnosis with Diagnostic tool 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool). The diagnostic system (Diagnostic tool) provides the following information.

    Categories

     
    Copyright © 2025 www.hvenueqx.com - 0.0127