Hyundai Venue (QX): Starter / Specifications
| Specification |
|
Item |
Specification |
|
|
Rated voltage |
12V, 0.9 kW |
|
|
The number of pinion teeth |
10 |
|
|
Performance [No-load, 11.5V] |
Ampere |
Max. 60A |
|
Speed |
Min. 5,500 rpm |
|
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable.
Components 1. Front bracket assembly 2. Magnet switch assembly 3. Lever 4. Reducer assembly 5. Lever stop 6.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Rear Seat Assembly. Repair procedures
- Normal Maintenance Schedule
- Child-Protector Rear Door Locks
- New on site
- Most important about car
