Hyundai Venue (QX): Body (Interior and Exterior) / Specifications

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Specifications

Specifications
Items
Specification
Hood
 Type
 Rear hinged, stay rod type
Front Door
 Construction
 Front hinged, frame door construction
Regulator system
 Wire drum type
Locking system
 Pin-fork system
Rear Door
 Construction
 Front hinged, frame door construction
Regulator system
 Wire drum type
Locking system
 Pin-fork system
Tail Gate
 Type
 Front hinged, gas lifter type
Seat Belts
 Front
 3 point type with Emergency Locking Retractor (E.L.R)
Rear
 3 point type with Emergency Locking Retractor (E.L.R)

Tightening Torque
Items
N.m
Kgf.m
lb-ft
Front and rear doors
 Door hinge to body
 33.3 - 41.2
 3.4 - 4.2
 24.6 - 30.4
Door hinge to door
 21.6 - 26.5
 2.2 - 2.7
 15.9 - 19.5
Door checker to door
 6.9 - 10.8
 0.7 - 1.1
 5 - 8
Door checker to body
 21.6 - 32.4
 2.2 - 3.3
 15.9 - 23.9
Door glass mounting bolt
 7.8 - 11.8
 0.8 - 1.2
 5.8 - 8.7
Outside handle base mounting bolt
 3.5 - 5.7
 0.35 - 0.58
 2.58 - 4.2
Door channel mounting bolt and nuts
 7.8 - 11.8
 0.8 - 1.2
 5.8 - 8.7
Door latch mounting bolts
 7.8 - 10.8
 0.79 - 1.1
 5.75 - 8
Door module mounting bolts
 7.8 - 11.8
 0.8 - 1.2
 5.8 - 8.7
Door striker mounting bolts
 16.7 - 21.6
 1.7 - 2.2
 12.3 - 15.9
Tail gate
 Tail gate hinge to body
 21.6 - 26.5
 2.2 - 2.7
 15.9 - 19.5
Tail gate hinge to tail gate
 7.8 - 11.8
 0.8 - 1.2
 5.8 - 8.7
Tail gate latch mounting bolts
 7.8 - 11.8
 0.8 - 1.2
 5.8 - 8.7
Tail gate striker mounting bolts
 21.6 - 26.5
 2.2 - 2.7
 15.9 - 19.5
Hood
 Hood hinge to body
 21.6 - 26.5
 2.2 - 2.9
 15.9 - 21.0
Hood hinge to hood
 18.7 - 25.3
 1.9 - 2.6
 13.7 - 18.8
Hood latch to body
 7.8 - 11.8
 0.8 - 1.2
 5.8 - 8.7
Seat 
Front seat mounting bolts
 34.3 - 53.9
 3.5 - 5.5
 25.3 - 39.8
Front seat frame mounting bolts
 44.1 - 53.9
 4.5 - 5.5
 32.5 - 39.8
Rear seat mounting bolts
 16.7 - 25.5
 1.7 - 2.6
 12.3 - 18.8
Seat belt
 Height adjuster mounting bolts
 39.2 - 53.9
 4.0 - 5.5
 28.9 - 39.8
Front seat belt upper anchor mounting bolt
 39.2 - 53.9
 4.0 - 5.5
 28.9 - 39.8
Front seat belt pretensioner mounting bolt
 39.2 - 53.9
 4.0 - 5.5
 28.9 - 39.8
Rear seat belt lower anchor mounting bolts
 39.2 - 53.9
 4.0 - 5.5
 28.9 - 39.8
Rear seat belt retractor mounting bolt
 39.2 - 53.9
 4.0 - 5.5
 28.9 - 39.8
Rear center seat belt retractor mounting bolt
 39.2 - 53.9
 4.0 - 5.5
 28.9 - 39.8
Seat belt buckle mounting bolt
 39.2 - 53.9
 4.0 - 5.5
 28.9 - 39.8
Outside rearview mirror
 Outside rearview mirror mounting nuts
 6.9 - 10.8
 0.7 - 1.1
 5.1 - 8.0
Fender
 Fender panel mounting bolts
 6.9 - 8.8
 0.7 - 0.9
 5.1 - 6.5
Wiper arm
 Wiper arm mounting nuts
 22.6 - 26.5
 2.3 - 2.7
 16.6 - 19.5
Rear spoiler
Rear spoiler mounting nuts
 5.9 - 6.4
 0.6 - 0.65
 4.3 - 4.7
Quarter fixed glass
 Quarter fixed glass mounting nuts
 3.9 - 4.4
 0.4 - 0.45
 2.9 - 3.3
Sunroof
 Sunroof mounting nuts
 3.9 - 5.9
 0.4 - 0.6
 2.9 - 4.3
Sunroof mounting bolts
 7.8 - 11.8
 0.8 - 1.2
 5.8 - 8.7

    Special Service Tools Tool (Number and name) Illustration Use 09880-4F000 Hog ring clip installer Hog ring clip installation

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Description and operation

    Description The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer system aims to drastically reduce the rate of auto theft.

    Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation

    Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.0198