| Component Location |

| 1. Tailgate trim |
Replacement 1. Remove the TailGate trim. (Refer to tailgate - "Tailgate Trim") 2. Using a flat-tip screwdriver, lift up slightly the socketclips (A) of both ends on the lifter (B), and thenremove the lifter from the bracket.
Replacement • Put on gloves to prevent hand injuries.
Replacement 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative (-) battery terminal.
Removal 1. Remove the bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the connector (A) from the PDW sensor. [L - Type] Installation 1.