| Components |

| 1. Timing
chain 2. Timing chain guide |
3. Timing
chain arm 4. Timing chain auto tensioner |
Removal • Use fender covers to avoid damaging painted surfaces.
Removal 1. Turn the crankshaft pulley clockwise, and align its groove with the timing mark of the timing chain cover.
Removal Precautions for using the plastic pulley • Be careful not to place the pulley to downwards of the floor or table.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.