Hyundai Venue (QX): Hydraulic System / Torque Converter Control Solenoid Valve (T/CON_VFS). Description and operation
| Description |
| • |
Torque converter control solenoid valve (T/CON_VFS) is attached to the
valve body.
|
| • |
This variable force solenoid valve indirectly controls the hydraulic
pressure inside the torque converter.
|
Replacement • If necessary replace the valve body, hydraulic adjustment is needed, replace the automatic transaxle assembly.
Specifications ▷ Control type : Normally low type Shape Items Specifications Control current (voltage) [mA] 0 - 850 Supply pressure [kpa (kgf/cm², psi)] 539.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Ambient Temperature Sensor. Description and operation
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Tire Pressure Monitoring System (TPMS) (Type A)
- Trip Computer
- Fuel Filler Door
- New on site
- Most important about car
