Hyundai Venue (QX): Hydraulic System / Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
| Specifications |
|
Shape |
Items |
Specifications |
|
|
Control current (voltage) [mA] |
0 - 850 |
|
Supply pressure [kpa (kgf/cm², psi)] |
539.36 (5.5, 78.23) |
|
|
Control pressure [kpa (kgf/cm², psi)] |
0-519.75 (0-5.3, 0-75.38) |
|
| Internal
resistance(Ω) |
4.8 - 5.4 |
Description • Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the torque converter.
Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Hyundai Venue (QX) (2020-2026) Service Manual: Parking Distance Warning (PDW) Sensor. Repair procedures
Removal 1. Remove the bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the connector (A) from the PDW sensor. [L - Type] Installation 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Maintenance
- Vehicle Information
- Liftgate
- New on site
- Most important about car
