Hyundai Venue: Rear Door / Rear Door Outside Handle. Components and components location

Hyundai Venue (QX) (2020-2025) Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Outside Handle. Components and components location

Component Location

Hyundai Venue. Rear Door Outside Handle. Components and components location

1. Rear door outside handle

Rear Door Inside Handle. Repair procedures

Removal 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Cut the heat welds with a knife and remove the front door inside handle (A)...

Rear Door Outside Handle. Repair procedures

Replacement • When removing with a flat-tip screwdriver or remover,wrap protective tape around the tools to preventdamage to components...

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Blower Unit. Components and components location

Component Location 1. Blower unit assembly Component Location 1. Intake seal 2. Intake upper case 3. Intake actuator 4. Intake door 5. Intake lower case 6. Blower pad 7...

Hyundai Venue (QX) (2020-2025) Service Manual: Special service tools

Special Service Tools Tool (Number and Name) Illustration Use Deployment tool 0957A-34100A Airbag deployment tool. Use with (0957A-AL140) Dummy 0957A-38200 Simulator to check the resistanceof each wiring harness...