Hyundai Venue: SRSCM / Side Impact Sensor (SIS). Description and operation
Side Impact Sensor (SIS) system consists of two SIS which are installed at each
center pillar nearby (LH and RH).
Side Impact Sensor is also called A-SIS because it detects acceleration.
SRSCM decides deployment of the airbag and the time of deployment through the
collision signal of the SIS when the collision occurred.
Removal
•
Removal of the airbag must be performed according to the precautions/
procedures described previously...
Other information:
REMOVAL
Front Turn Signal Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the turn signal lamp connector (A).
3.
Remove the turn signal lamp (A) after loosening mounting bolts...
Replacement
1.
Remove the plug hole (A), loosen the mounting nuts and remove the wiper
arm (B).
Tightening torque :
22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)
2...
Categories

1. Instrument cluster
2. Horn
3. Key ignition switch/ Engine Start/Stop button
4. Infotainment system
5. Hazard warning flasher switch
read more