Hyundai Venue: Multifunction Switch / Specifications
Hyundai Venue (QX) (2020-2025) Service Manual / Body Electrical System / Multifunction Switch / Specifications
| Specifications |
|
Items |
Specifications |
|
|
Rated voltage |
12 V (Test Voltage : 5V ± 0.1V, Washer : 14V ± 0.1V |
|
|
Operating temperature range |
-22 to +176°F (-30°C to +80°C) |
|
|
Rated load |
Washer |
Washer : MAX. 7A (Motor load) |
Other information:
Hyundai Venue (QX) (2020-2025) Owners Manual: Warning Light and Message
Check LKA system If there is a problem with the system a message will appear for a few seconds. If the problem continues LKA system failure indicator will illuminate. LKA system failure indicator LKA system failure indicator (yellow) will illuminate if the LKA system is not working properly...
Hyundai Venue (QX) (2020-2025) Service Manual: Front Driveshaft. Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 107...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Smart Key
- Remote Key
- To set Cruise Control speed
- New on site
- Most important about car
Master warning mode
This warning light informs the driver the following situations.
-- Forward Collision-Avoidance Assist system malfunction (if equipped)
-- Forward Collision-Avoidance Assist radar blocked (if equipped)
-- Blind-Spot Collision Warning system malfunction (if equipped)
-- Blind-Spot Collision Warning radar blocked (if equipped)
-- Lamp malfunction (if equipped)
-- High Beam Assist malfunction (if equipped)
-- Tire Pressure Monitoring System (TPMS) malfunction (if equipped)
Copyright © 2025 www.hvenueqx.com