Hyundai Venue: Body Electrical System / Multifunction Switch

Hyundai Venue (QX) (2020-2023) Service Manual / Body Electrical System / Multifunction Switch

Repair procedures

Removal 1. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the multifunction switch connector and then remove the low horn (A)...

Specifications

Specifications Items Specifications Rated voltage 12 V (Test Voltage : 5V ± 0.1V, Washer : 14V ± 0...

Other information:

Hyundai Venue (QX) (2020-2023) Service Manual: TJ Joint. Repair procedures


Disassembly    • Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease. • The boot band should be replaced with a new one...

Hyundai Venue (QX) (2020-2023) Service Manual: Description and operation


Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable. When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil...

Categories

Seat Belt Warning Light

Seat belt warning light (for driver’s seat)

Hyundai Venue. Seat Belt Warning Light

As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening. However, if the seat belt is unfasted, a warning chime will sound for approximately 6 seconds.

read more


 
Copyright © 2023 www.hvenueqx.com