Hyundai Venue: Smart Key System / Specifications

Hyundai Venue (QX) (2020-2024) Service Manual / Body Electrical System / Smart Key System / Specifications

Specifications
Smart Key Unit (Integrated Body Contorl Unit(IBU))
Items
Specification
Rated voltage
DC 12V
Operating voltage
DC 9 - 16V
Operating temperature
-40°F to 185°F (-40°C to 85°C)
Load
Less than 3.9mA (Approx. 2.5mA increased with welcome light operation)

RF Receiver
Items
Specification
Frequency
433.92 Mhz
Antenna type
FSK (Frequency Shift Keying)

Smart Key Fob
Items
Specification
Battery
Lithium battery 3V 1EA
Distance
30m from vehicle, RF : 30m, Passive(LF) : 0.7m
Battery life
More than 2 years (10 times / a day)
Hyundai Venue. Specifications   
An inappropriately disposed battery can be harmful to the environment and human health.
Dispose the battery according to your local law(s) or regulation.
Push buttons
4 (Door Lock / Unlock, Remote start, Panic)
Frequency(Rx)
134.2 kHz
Frequency(Tx)
433.92 MHz
Numbers
2EA

Antenna
Items
Specification
Rated voltage
DC 12V
Operating voltage
DC 9 - 16V
Operating temperature
-22°F to 167°F (-30°C to 75°C)
Frequency
125kHz
Numbers
Interior(2EA), Door(2EA), Bumper(1EA)

    Smart Key System

    ..

    Components and components location

    Component Location 1. Interior antenna 1 2. Interior antenna 2 3. Door outside handle antenna 4. Smart key unit 5...

    Other information:

    Hyundai Venue (QX) (2020-2024) Service Manual: Driver Airbag (DAB) Module and Clock Spring. Description and operation


    Description • Driver Air Bag (DAB) DAB is installed in the steering wheel, and electrically connected to the SRSCM via clock spring. It is deployed during frontal impact to protect the driver. • Clock Spring Clock spring delivers actuation signal, generated by the sensors installed in the front and right/left sides of a vehicle, to the inflator (gas generator) of the driver air bag module via internal cable...

    Hyundai Venue (QX) (2020-2024) Service Manual: PTC Heater. Repair procedures


    Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch...

    Categories

    Seat Belt Warning Light

    Seat belt warning light (for driver’s seat)

    Hyundai Venue. Seat Belt Warning Light

    As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening. However, if the seat belt is unfasted, a warning chime will sound for approximately 6 seconds.

    read more


     
    Copyright © 2024 www.hvenueqx.com