Hyundai Venue: Manual Temperature Control Mode / Temperature & Air intake control
Temperature control (2)

Turn the knob to the right to increase the temperature. Turn the knob to the
left to decrease temperature.
The temperature will increase or decrease by 1°F/0.5°C for each incremental location.
When set to the lowest temperature setting, the air conditioning will operate continuously.
Air intake control (6)
The air intake control button is used to select either Fresh mode (outside air)
or Recirculation mode (cabin air).
Recirculation mode

When Recirculation mode is selected, air from the passenger compartment will
be recirculated through the system and heated or cooled according to the function
selected
Fresh mode

When Fresh mode is selected, air enters the vehicle from outside and is heated
or cooled according to the function selected.
Information
Using the system primarily in Fresh mode and Recirculation mode only when
needed is recommended for best results.
Prolonged operation of the heater in Recirculation mode and without the A/C
ON can cause fogging of the windshield.
In addition, prolonged use of the A/C ON in Recirculation mode may result
in excessively dry, dehumidified air in the cabin.
WARNING
- Continued use of the climate control system operation in Recirculation
mode for a prolonged period of time may cause drowsiness to the occupants in
the cabin. This may lead to loss of vehicle control which may lead to an accident.
- Continued use of the climate control system operation in Recirculation
mode with the A/C OFF may allow humidity to increase inside the cabin. This
may cause condensation to accumulate on the windshield and obscure visibility.
- Do not sleep in your vehicle or remain parked in your vehicle with the
windows up and either the heater or the air conditioning ON for prolonged periods
of time. Doing so may increase the levels of carbon dioxide in the cabin which
may lead to serious injury or death.
The instrument panel vent air flow can be directed up/down or left/right using
the vent adjustment lever.
The air flow can also be CLOSED using the vent adjustment lever...
Fan speed control (1)
The fan speed can be set as desired by pushing the fan speed control button.
More air is delivered with higher fan speeds.
Pressing the OFF button turns off the fan...
Other information:
The rear corner radars are located inside the rear bumper for detecting the side
and rear areas. Always keep the rear bumper clean for proper operation of the system.
NOTICE
The system may not work properly when the bumper has been damaged, or
if the rear bumper has been replaced or repaired...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the parking lamp when the driver turns the vehicle
off and opens the driver-side door.
With this feature, the parking lamps will turn off automatically if the driver
parks on the side of road at night...
Categories

Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver
and passenger doors or the rear liftgate.
1. Door Lock
2. Door Unlock
3. Remote start
read more