Hyundai Venue (QX): Hydraulic System / Valve Body. Repair procedures

Hyundai Venue (QX) (2020-2025) Service Manual / Automatic Transaxle System\ / Hydraulic System / Valve Body. Repair procedures

Replacement

•	If necessary replace the valve body, hydraulic adjustment is needed, replace the automatic transaxle assembly. (Refer to Automatic Transaxle System - "Automatic Transaxle")

•	After the automatic transaxle assembly exchange, input the hydraulic calibration information use a diagnostic tool.

❮Valve Body. Components and components location

Components Location 1. Solenoid valve support bracket 2. Solenoid valve support bracket (Directly solenoid) 3. Line Pressure Control Solenoid Valve 4.

Torque Converter Control Solenoid Valve (T/CON_VFS). Description and operation❯

Description • Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the torque converter.

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Ambient Temperature Sensor. Description and operation

Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

Hyundai Venue (QX): Hydraulic System / Valve Body. Repair procedures

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Ambient Temperature Sensor. Description and operation

Hyundai Venue (QX) (2020-2025) Service Manual: Intake Actuator. Components and components location

Categories