Service Adjustment Procedure Automatic Transaxle Fluid (ATF) Level Check • When checking the oil level, be careful not to enter dust, foreign matters, etc.
Description • The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels.
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Replacement 1. Open the glove box. 2. Press both sides of the glove box (A) and take it out. 3. Remove the filter cover (A) by pressing the knob. 4.