Hyundai Venue: ESP(Electronic Stability Program) System / ESP Control Module. Components and components location

Hyundai Venue (QX) (2020-2023) Service Manual / Brake System / ESP(Electronic Stability Program) System / ESP Control Module. Components and components location

Components

Hyundai Venue. ESP Control Module. Components and components location

1. Front - right tube
2. Rear - left tube
3. Rear - right tube
4. Front - left tube

5. MC SEC
6. MC PRI
7. ABS Control module (HECU)
8. Bracket

Schematic diagrams

Terminal Function Pin No Description Current (AMPS) Resistance (mΩ) Remark 1 POS...

ESP Control Module. Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery and battery tray...

Other information:

Hyundai Venue (QX) (2020-2023) Service Manual: Variable Intake Solenoid (VIS) Valve. Description and operation

Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or closes this valve according to engine condition (Refer to below table)...

Hyundai Venue (QX) (2020-2023) Service Manual: Description and operation

Description If the Gasoline Engine Control system components (sensors, ECM, injector, etc.) fail, interruption to the fuel supply or failure to supply the proper amount of fuel for various engine operating conditions will result...