Hyundai Venue: Brake System
Hyundai Venue (QX) (2020-2024) Service Manual / Brake System
- Specifications
- Special service tools
- Troubleshooting
- Brake bleeding procedures
- Repair procedures
- Brake Booster
- Master Cylinder
- Brake Line
- Brake oil
- Brake Pedal
- Front Disc Brake
- Rear Drum Brake
- Rear Disc Brake
- Brake Pad
- Stop Lamp Switch
- Parking Brake System
- Components and components location
- Parking Brake Lever. Repair procedures
- Parking Brake Switch. Repair procedures
- Parking Brake Cable. Repair procedures
- ABS(Anti-Lock Brake System)
- Components and components location
- Description and operation
- Schematic diagrams
- Troubleshooting
- EBD(Electronic Brake-force Distribution). Description and operation
- ABS Control Module. Components and components location
- Front Wheel Speed Sensor. Components and components location
- Front Wheel Speed Sensor. Repair procedures
- Rear Wheel Speed Sensor. Components and components location
- Rear Wheel Speed Sensor. Repair procedures
- ESP(Electronic Stability Program) System
- Components and components location
- Description and operation
- Schematic diagrams
- ESP Control Module. Components and components location
- ESP Control Module. Repair procedures
- Front Wheel Speed Sensor. Components and components location
- Front Wheel Speed Sensor. Repair procedures
- Rear Wheel Speed Sensor. Components and components location
- Rear Wheel Speed Sensor. Repair procedures
- ESP OFF Switch. Description and operation
Repair procedures
Removal
Front Seat Belt Pretensioner (BPT)
1.
Disconnect the battery negative cable, and wait for at least three minutes
before beginning work...
Specifications
Specifications
Item
Specification
Master cylinder
Type
Fixed
Cylinder I...
Other information:
Hyundai Venue (QX) (2020-2024) Service Manual: Mode Control Actuator. Components and components location
..
Hyundai Venue (QX) (2020-2024) Owners Manual: Engine Compartment Panel Fuse Replacement
Blade type fuse Cartridge type fuse 1. Turn the engine off. 2. Turn all other switches OFF. 3. Remove the fuse panel cover by pressing the tap and pulling up. 4. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Remote Key
- Shift-lock system, Shift-lock release, Parking
- Liftgate
- New on site
- Most important about car
Air bag collision sensors
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:
Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.
Copyright © 2024 www.hvenueqx.com