Hyundai Venue: Evaporative Emission Control System / Fuel Filler Cap. Description and operation
A ratchet tightening device on the threaded fuel filler cap reduces the chances
of incorrect installation, which seals the fuel filler. After the gasket on
the fuel filler cap and the filler neck flange contact each other, the ratchet
produces a loud clicking noise indicating the seal has been set.

Removal
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel
Line")
2...
Other information:
Your vehicle is equipped with driver’s and front passenger’s Pre-tensioner Seat
Belts (Retractor Pre-tensioner). The purpose of the pre-tensioner is to make sure
the seat belts fit tightly against the occupant’s body in certain frontal or side
collision(s)...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level sensor connector (A).
3.
Remove the brake fluid from the master cylinder reservoir with a syringe...
Categories
Seat belt warning light (for driver’s seat)

As a reminder to the driver, the seat belt warning light will illuminate for
approximately 6 seconds each time you place the ignition switch to the ON position
regardless of belt fastening. However, if the seat belt is unfasted, a warning chime
will sound for approximately 6 seconds.
read more