Hyundai Venue: Automatic Transaxle Control System / Inhibitor Switch. Troubleshooting
Hyundai Venue (QX) (2020-2024) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch. Troubleshooting
| Fault Diagnosis |
▶ Fault Diagnosis for Symptom
|
Major Symptom |
Expected Cause |
Items to Check and Measures |
|
Shift lever inoperable |
Faulty shift cable tension |
Adjust shift cable tension (refer to "Automatic Transaxle System – Inhibitor Switch") |
|
Faulty shift cable assembly/connection |
Check manual control valve assembly and re-assemble if necessary. |
|
|
Faulty shift cable bracket installation |
Check cable installation on the shift lever assembly and repair if necessary. |
|
|
Shock when shifting to and from D/R Motor run-up when shifting to and from D/R |
Faulty inhibitor switch "N" setting |
Use the "N" setting jig and adjust the "N" setting. |
|
(refer to "Automatic Transaxle System – Inhibitor Switch") |
||
|
Faulty oil pressure in the valve body. |
Replace valve body assembly or inspect/replace transaxle assembly |
|
|
Faulty engine start Current gear not indicated in the Cluster Warning Lamp ON Engine stall while stopped Creeping not possible Auto parking release disabled |
Faulty CAN terminating resistance/circuit |
Check PCU/battery management system module. |
|
Check PCU wiring connector conn ction. |
||
|
Faulty power supply (IG.1) to inhibitor switch circuit |
Check for gap on the junction box power terminal in the engine compartment
and fuse (TCU2) connection. Repair terminal or exchange junction box if
necessary. |
|
|
Faulty inhibitor switch circuit fuse |
Check fuse and junction box terminal, and repair. |
|
|
Faulty inhibitor switch wiring connector |
Check for foreign substance in the wiring connector, and check for gap on
the terminal. |
|
|
Check sealing on unused pin, and check for corrosion on the terminal. |
||
|
Faulty reverse lamp circuit |
Check reverse lamp ground, and reassemble if necessary. |
|
|
Faulty inhibitor switch wiring ground |
Check wiring ground, and reassemble if necessary. |
|
|
Faulty inhibitor switch circuit (unused code) |
Inspect in accordance with the inspection flow, then replace inhibitor switch
if necessary. |
|
|
Faulty inhibitor switch operation (faulty mid-range) |
Inspect in accordance with the inspection flow, then replace inhibitor switch
if necessary. |
Inhibitor Switch. Repair procedures
Inspection
▶ Inspection flow of the inhibitor switch
▶ Items to check
1.
Inspect DTC code.
2...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Remote start
- Immobilizer System
- Rear Combination Light Bulb Replacement
- New on site
- Most important about car
Interior Overview
1. Door lock/unlock button
2. Outside rearview mirror control switch
3. Central door lock switch
4. Power window switches
5. Power window lock switch
Copyright © 2024 www.hvenueqx.com