Hyundai Venue: Engine Control System / Knock Sensor (KS). Specifications

Hyundai Venue (QX) (2020-2024) Service Manual / Engine Control / Fuel System / Engine Control System / Knock Sensor (KS). Specifications

Specification
Item
Specification
Resistance (MΩ)
4.87

    Knock Sensor (KS). Description and operation

    Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking...

    Knock Sensor (KS). Schematic diagrams

    ..

    Other information:

    Hyundai Venue (QX) (2020-2024) Service Manual: TPMS Sensor. Description and operation


    Description 1. General description WU is a sensor placed in the tire that reports pressure and temperature. The WU is mounted inside the wheels, fixed to the valve. The angle between the valve and the housing of the WU is variable...

    Hyundai Venue (QX) (2020-2024) Service Manual: Drive Plate. Repair procedures


    Removal and Installation 1. Remove the automatic transaxle. (Refer to Automatic Transaxle System - "Automatic Transaxle") 2. Remove the drive plate(A). Tightening torque : 71...

    Categories

    Fuel gauge

    Hyundai Venue. Fuel gauge

    This gauge indicates the approximate amount of fuel remaining in the fuel tank.

    Information

    The fuel tank capacity is given in chapter 2. The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty. On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.

    read more


     
    Copyright © 2024 www.hvenueqx.com