Hyundai Venue: Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Specifications

Hyundai Venue (QX) (2020-2023) Service Manual / Automatic Transaxle System / Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Specifications

Specifications

▷ Control type : Normally high type

Shape	Items	Specifications
	Control current (voltage) [mA]	0 - 850
	Supply pressure [kpa (kgf/cm², psi)]	539.36 (5.5, 78.23)
	Control pressure [kpa (kgf/cm², psi)]	0 - 519.75 (0 - 5.3, 0 - 75.38)
	Internal resistance(Ω)	4.8 - 5.4

Line Pressure Control Solenoid Valve (LINE_VFS). Description and operation

Description • Line pressure control solenoid valve is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the line pressure...

Line Pressure Control Solenoid Valve (LINE_VFS). Components and components location

Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1...

Other information:

Hyundai Venue (QX) (2020-2023) Owners Manual: Cruise Control

Cruise Control Operation 1. Cruise indicator 2. SET indicator The Cruise Control system allows you to drive at speeds above 20 MPH (30 km/h) without depressing the accelerator pedal. WARNING Take the following precautions: Always set the vehicle speed under the speed limit...

Hyundai Venue (QX) (2020-2023) Service Manual: Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect IATS connector. 3. Measure resistance between IATS terminals 3 and 4. 4. Check that the resistance is within the specification...