Hyundai Venue: Hydraulic System / Mechanical Oil Pump. Description and operation
Hyundai Venue (QX) (2020-2023) Service Manual / Automatic Transaxle System / Hydraulic System / Mechanical Oil Pump. Description and operation
| Description |
| • |
The oil pump is built-in as a single unit with the 26 Brake chamber.
|
| • |
Rotation of the pump builds the hydraulic pressure needed for the lubrication
of the various parts of the transaxle and operation of the clutch and
brakes.
|
| • |
The oil also circulates through the torque converter and the cooler.
|
Operation flow of the mechanical oil pump
Description and operation
Description
•
The oil pump is powered by the engine. ATF passes through the oil filter
and gets distributed along the oil channels...
Mechanical Oil Pump. Components and components location
Components
1. Housing - Oil pump
2. Cover - Oil pump
3. Gear - Oil pump drive
4. Gear - Oil pump driven
5. Shaft - Reaction
6...
Other information:
Hyundai Venue (QX) (2020-2023) Service Manual: Transaxle Control Module (TCM). Repair procedures
Inspection ▶ Transaxle Control Module(TCM) Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check point...
Hyundai Venue (QX) (2020-2023) Service Manual: Assist Handle. Components and components location
..
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Smart Key
- Remote Key
- To set Cruise Control speed
- New on site
- Most important about car
Remote Key
Your HYUNDAI uses a remote key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate.
(1) Door Lock
(2) Door Unlock
(3) Panic
Locking Your Vehicle
To lock your vehicle:
1. Make sure all doors, the engine hood and the liftgate are closed.
Copyright © 2023 www.hvenueqx.com