Hyundai Venue (QX): Hydraulic System / Mechanical Oil Pump. Components and components location
| Components |
| 1. Housing - Oil pump 2. Cover - Oil pump 3. Gear - Oil pump drive 4. Gear - Oil pump driven 5. Shaft - Reaction 6. Oil - Seal |
7. Sleeve 8. Bearing - Housing 9. Cap - Sealing 10. Needle roller bearing 11. Bolt 12. Snap ring - Housing |
Description • The oil pump is built-in as a single unit with the 26 Brake chamber. • Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes.
Removal 1. Remove the automatic transaxle. (Refer to Automatic Transaxle System - "Automatic Transaxle") 2.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation
Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord
Hyundai Venue (QX) (2020-2026) Service Manual: Front View Camera Unit. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front view camera cover (A). 3. Separate the front view camera connector (A). 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Vehicle Information
- Instrument Cluster
- Operating Door Locks from Outside the Vehicle
- New on site
- Most important about car
